1.2W/m.k Thermal Conductive Silicone Insulation Pad

LC120 thermal silicone pad is a very cost-effective general economic thermal gap filling gasket, soft with its own micro-stick, easy assembly. Under low compressing force to show good thermal conductivity and electrical insulation properties. Bedding on the gap between the heat device and the heat sink or the machine shell to extrude air to reach the full contact forming a continuous thermal conduction. Using heat sink or machine shell as a cooling device can effectively increase the cooling area to achieve a good cooling purposes.

Features & Benefits:   

• Low cost, high efficiency, cost-effective
• Replace the volatile pollution of the thermal grease
• Natural sticky, easy to install, can be reused
• Wide range of thickness, can fill any uneven size gap
•  Typical Applications:
•  
• Communication equipment    
• New energy vehicles / power batteries
• Computer                  
• Car equipment / charger
• Switching power supply       
• PC server / workstation
•  
• Flat-panel TV                 
• Optical drive / COMBO
• Security equipment           
• Notebook computers
• Video equipment             
• Any heating element and radiator

• Physical Properties:

  Test Item	Test Method	Unit	LC120
  Color	Visual	-	Off white
  Thickness	ASTM D374	mm	0.3~15.0
  Hardness	ASTM D2240	Shore 00	40±5~80±5
  Specific Gravity	ASTM D792	g/cm3	2.1
  Tensile Strength	ASTM D412	Mpa	0.34
  Elongation	ASTM D412	%	100
  Tear Strength	GBT 529-2008	KN/m	1.4
  Breakdown Voltage	ASTM D149	KV/mm	≥10
  Volume Resistivity	ASTM D257	Ω·cm	8×1012
  Continuous Use Temp	EN344	℃	-40~150
  Flame Rating	UL 94	-	V-0
  Weight Loss	@150℃240H	%	≤0.5%
  Dielectric Constant	ASTM D150	@1MHz	5.41
  Thermal Conductivity	ASTM D5470	W/m·K	1.2

  Standard size：200mm×400mm，300mm×400mm；Customized size available; 

  Coated with fiberglass/one side or double side adhesive/aluminum foil available

• For more , please kindly feel free to contact rita(at)szutd.com